HDTV Receivers, Tuners & Processing Tools
   Local Time Pacific USA : 
Office Hours:
M-F 9:30am-4:30pm PST




Up To 1080p Video Resolutions Via HDMI Output

Price: $189.99

(srp $219.99 You Save $30)

For Analog Cable
TV Only!


This RF coax to HDMI video audio TV tuner (receiver) is a professional grade TV channel decoder, designed for converting analog coax TV signals or RF modulated signals into digital HD formats for applications such as displaying, recording, or further A/V broadcast and distribution.

This RF receiver TV tuneris a stand alone TV tuner with support of full TV channel frequencies and can decode all standard UHF/VHF TV, CATV and satellite coax output channels for NTSC systems.

With the advanced video processor built in, this analog RF coax TV converter can enhance analog TV quality to the ultimate digital format at 1080p HDMI or 1920x1200 pixels DVI format with astonishing digital video quality for visual entertainment.

This RF coax to HDMI TV tuner supports all the coax type A/V signal inputs from:

  • cable outlet or cable box RF out for analog TV system
  • private UHF/VHF TV broadcast through RF antenna
  • satellite receivers with coax out Application Diagram For CATV8
  • digital signage set top boxes with coax outputs
  • surveillance CCTV system with modulated output
  • Cable radio or cable FM station
  • A/V modulators used in MATV setup

This TV tuner/converter provides clear and smooth video with great audio quality. No noise and no interference after the long distance transmission.

More Uses for External TV Tuners:

  • Monitor TV Tuner (Monitor TV Receiver)
  • Projector TV Tuner (Projector TV Receiver)
  • Home Theater TV Tuner (Home Theater TV Receiver)

Easy 1-Minute Setup

No initial configuration setup needed. No TV channel scan needed. 100% hardware operation with easy cable setup.

Simply connect the coax cable from your cable outlet, DVR, satellite receiver or RF modulator into this converter and then connect the HDMI output from this unit to a LCD TV, HD monitor/projector or HDMI switch/splitter for further integration.

After 1-minute cable hookup, you can be ready to use the supplied IR remote to tune into any available analog channel and enjoy the shows.

Full-Frequency TV Channels For CATV Satellite

This coax receiver doubles as an external analog TV tuner. It has a full-frequency analog tuner built in and able to decode all standard CATV and aerial UHF/VHF channels within the range of 48.25 to 883.25MHz.

This tuner unit supports all standard analog cable TV channels from CH1 to CH139 or aerial VHF/UHF channels from CH2 to CH83. The built-in tuner is used for all countries using NTSC for TV broadcast standard.

The coax RF TV tuner can also be used for those satellite receivers with TV2 out from DirecTV, Dish Network or all other Free-To-Air satellite set top boxes. Check your satellite receiver first and make sure that the coax output from your satellite receiver's coax output can output to certain TV channel.

Easy Add-On TV Tuner Module

This unit is also a great add-on TV tuner module for those HDTV sets, flat panel DVI/HDMI monitors/projectors that do not have coax TV tuner inputs or have broken RF coax input for alternative replacement solution.

You can turn any HD monitor, LCD monitor or HDMI projector into a full-channel TV display with the help provided by this tuner module.

<4>1080P HDMI DVI Video Output

This TV tuner module is able to convert the RF coaxial cable signals into either 1080p HDMI output or DVI output at 1920x1080 pixels. The HDMI output of this unit is backward compatible with all DVI-D digital displays through using with using HDMI to DVI adapter or cable.

Advanced Analog To Digital Conversion

This TV tuner uses advanced HD video processor with powerful digital comb filter for digitally decoding TV channel signal into sharp images with vivid color depth during A/D conversion. Its auto noise reduction process also helps minimize artifacts and other video noises caused by unsynchronized video pluses.

Daisy Chain Setup

This TV video converter can also be used as a standalone video converter/switch or cascaded with other HDMI video processors, HDMI/DVI switches/splitters or mixers to form a large-scale display system.

Great tuner solution for all multimedia projects or professional installers to use for expanding current client's setup at any stage. Multiple of these RF demodulator/tuner units can work together with our video wall system or split-screen video processor to form a large-scale TV display system or display multiple TV channels on one screen at the same time.

This unit is commonly installed for various applications such as:

Classrooms, training center and conference room
  • Public video broadcasting such as air ports, train stations, retail stores
  • Media control rooms and multimedia center
  • Tradeshows, hospitals, auditorium and command rooms
  • Digital signage
  • IR Remote Controller

    This external TV tuner can be fully operated and controlled via the supplied IR remote controller or push buttons on the front panel, just like the way we were using the TV remote to flip through channels, mute or turn up TV volume.

    Larger Picture

    Add/Delete TV Channels

    Users can use the supplied IR remote control to program/remove the unwanted cable channels from their current cable TV lineup or antenna reception. The deleted channel will be skipped when flipping channel up/down button and can always be added back to the list if needed.

    Last Channel Memory

    This TV tuner unit will stay tuned to the same last TV channel when the power comes back on after power-off or power outage or users manually unplugging the power adapter.

    Auto Gain Control

    This coax converter is featured with AGC circuitry for auto adjustment on both video and audio levels. The output quality will be re-calibrated and retained the picture stability as the original input A/V signal for the remote end display with minimum distortion and noise-free with full brightness and contrast.

    Excellent Heat Dissipation

    This TV tuner module is featured with robust metal die-cast chassis, which provides excellent heat dissipation and long durability.


    This tuner receiver will tune-in only to analog cable channels. It will not work with antenna or digital cable TV.


    • Professional grade agile RF coax tunerr for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels.
    • Decode all UHF/VHF channels, analog cable channels, satellite RF output and other modulated outputs.
    • Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems.
    • Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants.
    • Full-frequency analog NTSC cable channel support from CH2 to CH139.
    • Full aerial VHF/UHF channel support from CH2 to CH83.
    • Backward compatible with all DVI equipments via using HDMI to DVI adapter.
    • Easy replacement solution for HDTVs with broken coax tuner inputs.
    • External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs.
    • Advanced HD video processor with digital comb filter for smooth digital video/audio output.
    • Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details.
    • Multiple of this tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time.
    • Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system.
    • Easy operation control via IR remote controller or push buttons on the front panel.
    • Perfect for integration with existing closed-circuit TV system and works with quad video processors, multiplexers, and DVR's.
    • Digital LED screen for TV channel display on the front panel of the module to show users the TV channel selected.
    • Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance.
    • Supports last channel memory. Stay tuned to the last TV channel after being powered off manually or power outage event.
    • Compact size with robust metal die-cast chassis for excellent heat dissipation and long durability.

    Box Includes:

    • IR Remote Control
    • Batteries
    • 110V AC to DC Power Adapter
    • User Manual
    • 3ft HDMI Cable - OPTIONAL


    TUNER p/n CATV8
    Channel Display Digital LED Screen
    Video System Support NTSC
    Channel Frequency Range
    • CATV: CH1 to CH139 (48.25 to 883.25MHz)
    • Air: UHF/VHF: CH2 to CH83 (471.25 MHz to 885.25 MHz)
    RF Input Level -5 to +30 dbmv
    Video Output Level 1Vp-p +/- 0.2Vp-p (75 Ohm)
    Audio Output Level 0.755Vp-p +/- 0.2Vp-p (600 Ohm)
    Noise Level 10db (max)
    RF Input Connector F-Type female x 1
    Video Audio Output HDMI female x 1
    Channel/Volume Operation
    • By IR remote controller
    • By push buttons on the front panel
    Video/Audio Gain Control Auto adjustment
    Power Consumption 1.8 W
    Power Supply
    • AC Power Input: 100V-240V AC
    • DC Power Output: 12V / 500mA Center Positive



    • Use of this page implies agreement to this web site Policy.
    • Pictures are for reference only. Products may differ slightly from images shown.
    • Items P/Ns are our stock identification part numbers, also known as SKU. Do not confuse with model numbers.
    • Design and specifications of these units are subject to change without prior notice.

    Home | Contact | Policy | Privacy | Office


    Follow FirebirdSystems on Twitter         Follow FirebirdSystems on Facebook

    Copyright © 1995 - Firebird Systems Inc., All Rights Reserved