HDTV CABLE RECEIVER HDTV CABLE TUNER
QAM/ATSC SET TOP BOX

Front Panel Buttons | Back Panel Connections

Fully DVB-C/MPEG2 compliant 256QAM HDTV Receiver

Product Description:

DCT615 is the advanced and low cost high-end HDTV Decoder Box. This unit can receive digital ATSC over-the-air HDTV broadcast signals from external antenna or digital Cable clear non-encrypted QAM 64 and 256 TV signal from Cable RF source.

The HDTV tuner receiver is a perfect match for consumer's EDTV or HDTV monitors and the excellent 2nd high-def source for your HD built-in TVs. The unit features Component (YPbPr HD/SD), RGB (VGA connector for PC and TV), and Digital HDMI outputs. Audio outputs include Dolby® Digital Optical and Stereo L/R.

DCT615 also provides real-time Electronic Programming Guide (EPG) and functions like Channel List to instant channel tuning, one button for the current channel detail information, digital volume control and many more...

Cable TV Operators Compatibility: The DCT615 is compatible with Clear QAM channels of major cable operators such as Cablevision Systems Corporation, Charter Communications, Comcast Cable Communications, Cox Communications, Mediacom Communications Corp. and Time Warner Cable.

For maximum satisfaction we strongly suggest to contact your Cable Operator and verify the Clear QAM channels available through your local service. See the list of operators here.

Read more about Cable TV operators compatibility here.

Features:

• Receive and decode all over-the-air (ATSC) HDTV/SDTV formats.
• Receive and decode Digital Cable (Clear non-encrypted QAM) HDTV/SDTV formats.
• HD Component (Y-Pb-Pr), RGB, and HDMI HDTV outputs.
• Composite Video (CVBS) and S-Video outputs.
• Rear-panel switch for selecting output resolution (1080i / 720p / 480p / 480i).
• Digital Volume Control.
• V-CHIP & Closed Captioning.
• Instant Channel information, signal strength indicator and Electronic Programming Guide (EPG) at one glance.
• Master Channel list and 3 Favor Channel lists from OSD menu and remote control access.
• Video Output format selectable for 16:9 and 4:3 aspect ratio.
• Front panel display to show current channel number, automatic channel time clock display, channel scan and other information.
• RF pass-through connector so there are “RF in” and “RF out” connectors. (Enabling use of the analog tuner in a TV set for analog reception.)
• Decoded video in channel 3 or 4 output by CH3/4 switch. (Enabling last viewed HDTV channel look-up)

Easy To Install

The DCT615, QAM digital HDTV Cable receiver tuner box, is easy to install.

OEM Packing Includes:

Specifications

Video System (ATSC)
 

Sound System (ATSC)
 

Auto Channel Search (Digital)

EPG (Electronic Program Guide)

Closed Caption

V-Chip and MPAA

(ATSC) MPEG-2 MP@HL compliant video decoder
Video Type: 480i, 480p, 720p, 1080i

Dolby Digital
PCM

Supported

With ATSC PSIP(Program and Service Information Protocol)

EIA-608A/EIA-708B Supported

Parental Guide Rating Support

Composite Output (RCA)

S-video Output

Component Output (RCA)

RGB (D-Sub) Output

HDMI Output

Service PORT

Screen Saver

1 x RCA Stereo (L/R) Out

1 x RCA Video Out (480i)

1 x S-video Out (480i)

1 x Component Out (1080i, 720p, 480p)

1 x D-Sub (15 Pin) Out (1080i, 720p, 480p)

1 x HDMI Out(1080i, 720p, 480p)

1 x USB v.2.0 Jack for Service (ATSC Module)

Supported

Consumption

Standby Mode

15W

0.8W

FOOTNOTES: For improvement purposes, the design and specifications of this unit are subject to change without prior notice.