Small, energy efficient, and affordable, the US100-G2 Stereo/Mono Audio Amplifier fits the needs of most offices,
classrooms, and more. unlike traditional A/B amplifiers the Class D audio amplifier is energy efficient and easily
integrated behind a TV where space is limited. Compatible with US100-IRC Remote Controller.
- Sometimes a "D" is better than an "A"
Requiring less power, class D amplifiers use an efficient design that reduces size and cost. By removing the
need for large space consuming heat syncs and power regulators, the US100-G2 becomes easy to integrate with a
small size that can fit into most spaces.
- Use ALL the MICs
Using a captive screw connector and a 3 mode switch, the US100-G2 changes to meet your needs. Whether its a
condenser, dynamic, or wireless MIC the US100-G2 adapts to you.
- Your control needs
Fully adjustable, the US100-G2 has three control options: RS-232, IR, and Panel Buttons. Built to suit your
control needs, adjust the MIC and Line volume or the Bass and Treble levels using the control system you want.
- You are the experience
Become part of the audio with a built in MIC mixing feature. Simply speak into your MIC and hear your voice along
with the line audio. With only 1ms delay in MIC detection, have no noticeable lag between your words and the audio
coming from the speakers.
- Optional IR Remote Control Package purchasable separately. P/N US100-IRC:
Remote Controller Installation
View larger image here
- Gain: 32dB
- Frequency Range: 20Hz to 20KHz
- Signal/Noise Ratio: 80dB (at max output)
- Total Harmonic Distortion: 1% (1KHz), 0.3% (20KHz) -- at nominal levels
- Input Impedance: Input 1&2: >10KΩ
- MIC Input Impedance: 48V: 35KΩ, MIC: 10KΩ, LINE: 75KΩ
- Output Impedance: 3.5mm Loop Out: 50Ω stereo, Speaker out: 4 ~ 8Ω Amplifier
- Stereo Channel Separation: >75dB from 20Hz to 20KHz
- Common Mode Rejection Ratio: >70dB from 20Hz to 20KHz
- MIC Audio Detection Delay: 1ms
- Input Ports: 2 x RCA connectors, 1 x 3.5mm Audio, 1 x 3.5mm IR, 1 x Captive Screw MIC, 1 x Captive Screw RS-232
- Output Ports: 1 x Captive Screw Audio, 1 x 3.5mm Loop Out
- Dimensions (HxWxD): 1.5 x 3.78 x 3.43 (inch) or 38 x 96 x 87 (mm)
- Weight: 0.66lbs or 0.3kg
- Power consumption: 3.6W
Retail Package Content
- 1 x US100-G2
- 1 x AC Adapter
- 1 x User Manual
For improvement purposes, the design and specifications of this unit are subject to change without prior notice.