The Repeater/Extender expands the range of a wireless network. It receives the wireless signal from a router and then
amplifies and rebroadcasts it around the perimeter. Using a wireless repeater, computers and printers that are located
outside of the original range of the access point can now access the extended wireless network. Place the Repeater half
way between the router and the devices you wish to connect, and it effectively doubles the coverage area of your existing
wireless network, extending your network to the far end of your home or office.
Improves wireless coverage for all WLAN networks
Supports WLAN 802.11n (Draft 2.0) for wireless high-speed access
Downward compatible with 802.11g (54Mbps) and 802.11b standard (11 Mbps)
Supports 2.4GHz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP (128/64)
Software wizard for simple setup
WLAN access point/client according to IEEE 802.11n, g, b
110 ~ 230-volt socket
The WLAN client must support at least the WPA encryption standard
WLAN access point and the WLAN client with automatic IP address assignment (DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to “visible”
Retail Package Content
For improvement purposes, the design and specifications of this unit are subject to change without prior notice.
Use of this page implies agreement to this web site Policy.
Pictures are for reference only. Products may differ slightly from images shown.
Items P/Ns are our stock identification part numbers, also known as SKU. Do not confuse with model numbers.
Design and specifications of these units are subject to change without prior notice.